+380 67 553-95-79 +380 95 720-67-86

Mixing head Dynamica

1 / 6
1 / 6
arrow arrow

Mixing heads of the Dynamica series are designed for dynamic mixing of components of multi-component polyurethane systems, epoxy compounds and adhesive systems.

The heads are equipped with a mixing chamber cleaning unit (solvent flushing and compressed air flushing) and have a number of additional options.

Dynamica series mixing heads are used to process a wide range of different multi-component compounds. Depending on the characteristics of a particular application, the heads can have different designs, types of materials, drives.

For each type of material, be it elastomers, polyurethane foams, resins or adhesives, the heads will have their own design features, a set of options. The most commonly used options are:

  • Heating
  • Circulation of components
  • Supply of additional supply lines: pigment, catalyst, antifoam
  • Pressure regulation

Sometimes special materials can be used that prevent abrasive wear, chemical reactions with components, have a special shape of the mixer and mixing chamber.

Functionally, the heads are divided into the following types, depending on the materials to be processed:

  • Dymanica E — for elastomers
  • Dynamica F — for polyurethane foams
  • Dynamica R — for resins and adhesives
  • Dynamica G — for seals

For any of your tasks, our engineers have a solution!


Raw materials

Hot and cold casted polyurethane elastomers, polyurethane foams, polyester and epoxy resins, adhesives

Mixing type

Dynamic, low pressure


From 0,05 to 100 l/min


Electric or pneumatic motor