close-icon
+380 67 553-95-79 +380 95 720-67-86

For MDI

arrow
1 / 11
arrow
1 / 11
arrow arrow

OSV M MDI machine is designed for automatic dosing, mixing and pouring of three-component polyurethane elastomers based on MDI or the so-called quasi-systems (Quasi MDI). The main feature of the unit is easy change of hardness of parts in a wide range from 45o Shore A to 70o Shore D

The OSV M MDI casting machines allow to process three-component polyurethane systems based on MDI and easily change the hardness of parts in the range from 45 ° Shore A to 70 ° Shore D by pressing one button on the operator panel.

The machines has a wide range of basic functions that allow you to fully automate the task of dosing and mixing the components of a rather complicated polyurethane system MDI, and to obtain high quality finished products by free casting in open and closed molds:

  • Special software with the ability to adjust and monitor all operating parameters of the equipment, including the ability to save recipes set by the operator
  • Real-time flow control and ratio correction with volumetric meters
  • Automatic adjustment of the ratio when choosing the hardness of the poured mixture
  • Controlled heating and thermal insulation of the entire dosing line from the tanks to the mixing head
  • Recirculation of components and mixing to ensure homogenization and thermal stabilization
  • Vacuum system to remove air inclusions in components and ready-mix
  • Automatic and manual mixing chamber cleaning system

A wide range of additional options and devices will allow you to adapt the equipment in accordance with the requirements of the client’s production process.

Specifications

Materials for processing

MDI based hot cast elastomers

Mixing device

Low pressure dynamic mixing head

Number of metered components

3 basic components

Number of metered addtitives

up to 15 components

Basic components ratio

400:100:0 до 100:100:20

Output

From 0.5 up to 30 l/min

Tanks volume

From 20 to 500 l

Viscosity of components

Up to 10 000 mPa*s

Heating

Up to 80oC

What is the application of this equipment?